LG LDW2010F Owner's Manual page 27

Operation and settings
Restore and backup
> Backup: To take a backup of all of the set-
tings. If necessary, it make possible to return
to a backuped configuration. Click this
button and follow the instructions on the
browser to specify the folder and save the
setting data of the IP device. This configu-
ration backup can be restored when ever
needed.
> Restore: Click the [Browse] button and select
the file in which the configuration setting
data is stored and click the [Upload] button.
Click the [Restore] button after success-
fully uploading the backup configuration.
The System settings will be restored to the
uploaded configuration except network set-
tings, and reboot the system.
Notes:
• Backup and Restore can happen on IP device
having the same version of firmware. This
feature is not intended for multi-configura-
tions or for firmware upgrades.
• [Backup] function is allowed in HTTP proto-
col but not in HTTPS protocol.
Firmware
> Upgrade
1. Click the [Browse] button
2. Find and open the firmware file.
3. Click the [Upload] button.
4. Click the [Upgrade] button to update
the firmware.
> Initialize: The [Initialize] button should be
used with caution. Clicking it will return all of
the IP device's settings to the factory default
values. (Except for Network settings, PTZ
Protocol and Preset settings.)
Log & Report
27