Panel Facilities - Pioneer CDJ-200 Operating Instructions Manual

BEFORE OPERATING (PANEL FACILITIES)

PANEL FACILITIES

1 2
POWER
DIGITAL JOG BREAK
JET ZIP
27
26
IN/REALTIME CUE OUT
FOLDER SEARCH
25
HOT LOOP OUT ADJUST
TRACK SEARCH
24
SEARCH
23
22
21
CUE
20
PLAY/PAUSE
19
REV
18
1. POWER switch (—OFF/ _ON)
This switch is located on the rear panel of the unit. Switches
the unit's power ON/OFF.
2. Display
See 31–47.
3. PHONES VOL dial
Located on the rear panel of the unit. Adjusts the volume of
the headphones.
4. PHONES connecter
Located on the rear panel of the unit. ø6.3 mm phone plug
headphones can be connected.
5. EJECT button (0)
Ejects the disc. ( P.10)
6. TEXT MODE button
Changes the TEXT display. ( P.9)
7. TIME MODE button
Toggles the time display between the remaining track time
and elapsed time. ( P.9)
8. HOLD/RESET button
Preserves the effect of the Digital Jog Break. ( P.13)
9. AUTO CUE button
Toggles the Auto Cue ON/OFF. ( P.11)
10. TEMPO control range button (±6/±10/±16)
Changes the variable range of the tempo control. ( P.12)
11. MASTER TEMPO button/indicator
Turns the Master Tempo function ON/OFF (lights when turned
ON). ( P.13)
12. BEAT LOOP indicator
Lights at the loop-in point during loop play.
8
3 4
EJECT
COMPACT DISC PLAYER
TEXT MODE
TIME MODE
WAH HOLD/RESET AUTO CUE
TEMPO
RELOOP BEAT LOOP
/EXIT
LOOP
MASTER TEMPO
LOOP CUTTER
0
FWD
TEMPO
17 16 15 14
13. TEMPO control slider
Controls the track's tempo (playback speed). ( P.12)
14. Jog dial (–REV/+FWD)
15. Jog indicator
¶ When no disc is inserted, the indicator is turned off.
5
¶ When disc is inserted and in normal mode, indicator is
6
turned on.
7
¶ When the Digital Jog Break is ON, indicator flashes rapidly.
8
¶ When Digital Jog Break is in HOLD ON mode, indicator
9
flashes slowly.
10
16. Disc indicator
11 Located on the front panel of the unit.
¶ When no disc is inserted, the indicator is turned on.
12
¶ When disc is loading and unloading, indicator flashes.
¶ When disc loading is completed, indicator turns off.
17. Disc loading slot
Located in front panel. ( P.10)
18. Forced ejection hole
Located in front panel of the unit. ( P.10)
13
19. PLAY/PAUSE button (6)
( P.11)
20. PLAY/PAUSE indicator (6)
Lights when playing, and turns off when in pause mode.
21. CUE button
Use to set and confirm cue point. ( P.13)
22. CUE indicator
Lights when cue point is set, and turns off when in pause
mode.
23. SEARCH buttons (1, ¡)
Use to perform fast-forward and fast-reverse (with sound)
during playback mode. ( P.12)
24. TRACK SEARCH buttons (4, ¢)
Changes tracks in the forward/reverse direction. ( P.12)
25. FOLDER SEARCH buttons (+, =)
When using a CD-ROM with folder layers, use to change fold-
ers in the forward/reverse direction. ( P.12)
26. LOOP buttons
7 IN/REALTIME CUE/HOT LOOP button/indicator
Use to input loop-in point. (IN P.14)
Use to set the current playback point as cue point. (REALTIME
CUE P.13)
When pressed during loop play, returns playback to loop-in
point and begins replay. (HOT LOOP P.14)
7 OUT/OUT ADJUST button/indicator
Use to input loop-out point. (OUT P.14)
When pressed during loop play, adjusts loop-out point. (OUT
ADJUST P.15)
7 RELOOP/EXIT button
After finishing loop play, the stored loop-in/out information
can be used to begin loop play again. (RELOOP P.15)
When pressed during loop play, loop play stops and playback
returns to normal playback mode. (EXIT P.14)
7 BEAT LOOP/LOOP CUTTER button
When pressed during play or pause modes, the loop end is
automatically set based on the track's BPM (Beat Per
Minutes), and loop play starts. (BEAT LOOP P.14)
When pressed during loop play, the length of the loop is cut to
half its length. (LOOP CUTTER P.14)
27. DIGITAL JOG BREAK buttons
Turns each sound effect ON/OFF: JET, ZIP, WAH. ( P.13)