Command Reference - ILX Lightwave LDT-5500B Series User Manual

4
C H A P T E R
Name
TEC:GAIN
TEC:GAIN?
TEC:ITE
TEC:ITE?
TEC:LIM:ITE
TEC:LIM:ITE?
TEC:LIM:THI
TEC:LIM:THI?
TEC:MODE:ITE
TEC:MODE:R
TEC:MODE:T
TEC:MODE?
TEC:OUT
TEC:OUT?
TEC:R
TEC:R?
TEC:SEN?
TEC:SET:ITE?
TEC:SET:R?
TEC:SET:T?
TEC:T
TEC:T?
TEMP_LIMIT?
MODEL?
22
 LDT-5500B Series
C O M M A N D R E F E R E N C E
Parameters
1
NONE
1
NONE
1
NONE
1
NONE
NONE
NONE
NONE
NONE
1
NONE
1
NONE
NONE
NONE
NONE
NONE
1
NONE
NONE
NONE
Function
Used to set the TEC control loop gain parameter
Returns the TEC control loop gain parameter
Used to set the TEC current (ITE) set point
Returns the measured TEC current (ITE) value
Used to set the TEC constant current source limit value
Used to return the TEC constant current source limit
value
Used to set the TEC temperature limit value
Returns the TEC temperature limit value
Sets the mode to constant TEC current mode
Sets the mode to constant thermistor resistance mode
Sets the TEC mode to constant temperature mode
Returns the mode, ITE (TEC current), R (sensor) or T
Used to enable / disable the TEC current output
Returns the TEC OUTPUT status
Sets the constant sensor resistance; only available in
constant R mode
Returns the measured temperature sensor value
Returns the position of the SENSOR SELECT switch
Returns the constant ITE (TEC current) set point
Returns the constant R (temperature sensor value) set
point
Returns the constant T (temperature) set point
Used to set the TEC constant T (temperature) set point
Returns the TEC measured temperature value
Used to return the current status of the temperature limit
error
Returns the model of the instrument (5525B or 5545B)