Back Panel Controls And Connections; Sensor Select Switch; Figure 2.2 Ldt-5500B Series Back Panel - ILX Lightwave LDT-5500B Series User Manual

Back Panel Controls and Connections

Refer to Figure 2.2 for the following discussions of back panel controls and
connectors. There are no user serviceable parts in the instrument, including the
external fuses in the AC power entry module.

SENSOR SELECT Switch

The SENSOR SELECT switch is used to select sensor type and, in the case of
thermistor sensor, the source current level. Table 2.4 shows the SENSOR
SELECT positions and corresponding position code. When the sensor switch is
changed during TEC mode operation, the new sensor position code will be
indicated on the TEC display for three seconds.
Table 2.1 SENSOR SELECT Switch Positions
SWITCH POSITION
100 A
10 A
LM335
AD590


05_11
Back Panel Controls and Connections

Figure 2.2 LDT-5500B Series Back Panel

CODE
-01-
-02-
-03-
-04-
O P E R A T I O N
LDT-5500B Series
2
C H A P T E R
13
