Onkyo LS-T10 Instruction Manual page 10

1. (ON/STANDBY) button/INPUT button
Switches the power on/standby. Also, switches the input source.
To turn the power on: Press once when this unit is turned off.
To turn the standby: Press and hold for 3 seconds. The indicators go off.
To input the source: Press once to switch. Switches in the order of TV o USB o
Bluetooth each time the button is pressed.
‡
Auto Power On function: The unit automatically turns on when audio signal
is output from the TV. To switch on/off this function, press and hold first
and then
indicator flashes once. It flashes twice when this function is set to off.
‡
Auto Standby function: The unit automatically enters the standby mode if the
status with no operation and sound continues 5 minutes. To switch on/off this function,
press and hold first
set to on, the
2. INPUT source indicators
‡
Lights when the source is TV.
‡
Lights when the source is USB.
‡
Lights when the source is Bluetooth.
3. VOLUME –/+ buttons
Allows to adjust the volume by 1 step in the 0 to 30 range.
‡
Pressing the
front of the main unit will flash. Press the VOLUME-/+ button again to cancel mute.
4. SOUND MODE button
Switches the sound mode of input sound as desired. The mode switches in the
order of MUSIC o NEWS o MOVIE o MUSIC o each time the button is pressed.
You can select the mode for each input source (TV, USB and Bluetooth).
‡
MUSIC Mode: Gives concert hall-like sound effect.
‡
NEWS Mode: Allows to comfortably listen news programs.
‡
MOVIE Mode: Creates powerful 3D sound effect suitable for enjoying movies.
for about 3 seconds. When this function is set to on, the
, and then
indicator flashes once. It flashes twice when this function is set to off.
buttons together will mute audio. The status indicator on the
for about 3 seconds. When this function is
12
,