Playing via Bluetooth Connection
1
Steps 3 and 4 need to be performed
on the Bluetooth device.
If you reset Bluetooth of this unit or removed the registration of this unit from the
Bluetooth device, perform pairing (see above) again.
To connect any other Bluetooth device, press and hold the
unit to start pairing.
Within 33 ft (10m)
1. Turn the unit on.
2. Press
The
the pairing starts.
The pairing will end in about 30 seconds
and the indicator starts flashing slowly.
2
3. On the Bluetooth device, select
the unit (Onkyo LS-T10) to
make a connection.
For details on operation, see the instruction
manual of the Bluetooth device.
If the operation does not start as
normal within the 33 feet (10 m)
range, get the Bluetooth device closer
to the unit and retry the operation.
If a passcode (password, passkey or
PIN code) is requested, enter "0000".
When the pairing is completed, the
4. Start playback.
16
.
indicator flashes faster, and
indicator lights.
button of the main