Optional Sensors, 4-Pin White Plug - Clifford 10.5X Installation Manual

IMPORTANT! To achieve the best possible range, DO NOT leave the antenna cable
bundled under the dash. Always extend the cable full length during installation,
regardless of the antenna mounting location.
TRANSCEIVER/ANTENNA
CABLE

Optional Sensors, 4-Pin White Plug

There are two optional sensor input ports. Optional sensors which can be used are field, tilt, ultra-
sonic, or glass breakage. Alarm trigger inputs shorter than 0.8 seconds will trigger the Warn Away
response, while inputs longer than 0.8 seconds will trigger full alarm sequence and report Zone 4
or Zone 7 for multiplex input.
N N O O T T E E : : The ground for the optional sensors is now controlled by the GWA.
Programming Jumper
16
TRANSCEIVER/
ANTENNA
CONTROL
MODULE
Parking Light
Flash Jumper
-
+
© 2005
Directed Electronics, Inc.
®