Quickstart; In The Box; Requirements; Get Ready - smartvue S8 User Manual

QU ICK S TART
IN T HE BO X
Your Smartvue S8 network video recorder (NVR) comes with a power supply, Ethernet
cable, analog video cables, and a single page Quickstart Guide. Smartvue S8 network
video cameras are available separately, see your authorized Smartvue dealer or visit
www.smartvue.com.
REQ UIREMENT S
To use the Smartvue S8 solution you must have an Intel based personal computer with
a network connection and Microsoft Windows (XP or higher) or Apple MAC OS (10.0 or
higher) running Internet Explorer (6.0 or higher) or Safari Web Browser (3.0 or higher).

GET READY

Place the NVR on a flat surface near a network connection. Plug the power supply into
the NVR and the other end into a power outlet. Plug an Ethernet cable into the NVR (in
the LEFT ethernet port) and the other end into your network. Press the power switch
on the back of the NVR to turn it ON. Place the Smartvue S8 cameras into location (the
included shelf stand also can be used as a wall mount) and power them up. The
cameras can also be used in wired mode by connecting them to your network using
an Ethernet cable.
9