Manage Cameras; Add Cameras; Remove Cameras - smartvue S8 User Manual

MAN AG E CAMERAS
The Manage Cameras screen provides the features for adding and removing
cameras from the system.

ADD CAMERAS

To add a new camera, plug the camera in and the light on the front of the camera will
blink green. Click on the Add Cameras button to add cameras.
Once Add Cameras is clicked, the NVR will search for available cameras using the
Smartvue wireless or any Smartvue cameras connected wired to the same network the
NVR is connected to or any camera that is connected to either of the two ethernet
ports on the back of the NVR. A list of available cameras will be displayed. Hover on
any camera to preview it. Change the camera name as needed (you cannot use spaces
in the name) and then click on the Add button to add the cameras.
The camera will not scan into the system if the light on the front is not flashing green.
If not flashing green, try moving the camera closer to the NVR.
REMO V E CAMERAS
To remove a camera, click on the Remove Cameras button.
42