Honeywell HNDR-S4824 User Manual page 33

Basic Configuration
<TIP>
When assigning a name to a channel, the following dialogue box will appear. This box is also used later
in the system, but the method is always the same.
- To select a letter, use the [ARROW] (◄ and ► ) buttons or the number buttons on HNDR-S4824
front panel; "0" to "9". When using the [ARROW] buttons, use the [PLAY] (⊲) button to select each
choice.
- The intersection between the horizontal and the vertical bar is the selected choice.
- Press the ⊲ button to confirm the selected value.
- Or enter the related numbers in order of horizontal/vertical. (For example, in order to select "C", press
[3] and [2] button.)
- After setting all values, press the [Exit] button.
- Function Key
: Enter
: Back Space & delete
: Space
◄ : Left
► : Right
: Previous Code Page
: Next Code Page
Honeywell
2004.05.31 (v 2.0)
HNDR-S4824
33