Controlling Pan/Tilt; Controlling Zoom/Focus; Using Load Preset; Using Save Preset - Honeywell HNDR-S4824 User Manual

HNDR-S4824 Basic Configuration

3.7.1. Controlling Pan/Tilt

To control Pan and Tilt during live image monitoring mode.
- Press the [SELECT] button. Move the "Select" icon to the desired channel.
- Press the [MENU] button.
- Select 'Pan/Tilt' from the PTZ Menu.
- Control pan and tilt function using the up, down, left and right arrows.

3.7.2. Controlling Zoom/Focus

To control Zoom and Focus during live image monitoring mode.
- Press the [SELECT] button. Move the "Select" icon to the desired channel.
- Press the [MENU] button.
- Select 'Zoom/Focus' from the PTZ Menu.
- Control zoom and focus functions using the up, down, left and right arrows of front panel.

3.7.3. Using Load Preset

To load preset for dome camera during live monitoring mode.
- Press the [SELECT] button. Move the "Select" icon to the desired channel.
- Press the [MENU] button.
- Select 'Load Preset' from the PTZ Menu.
- Press number button for desired preset on the front panel.

3.7.4. Using Save Preset

To set a new preset point for dome camera during live monitoring mode
- Move dome camera to the desired position using the 'Pan/Tilt' and 'Zoom/Focus' menus.
- Press the [SELECT] button.
- Press the [MENU] button.
- Select 'Save Preset' from the PTZ Menu.
- Designate a number for the preset position by pressing a number button on the front panel.

3.7.5. Using Clear Preset

To clear preset position that is set at live monitoring mode
- Select a channel after pressing the [SELECT] button.
- Press the [MENU] button.
- Select "Clear Preset".
- Press a preset number for clearing.
16 Honeywell
2004.05.31 (v 2.0)