Subscribe to Our Youtube Channel
Related Manuals for HSM FA 500.3
Summary of Contents for HSM FA 500.3
- Page 1 OPERATING MANUAL SHREDDER HSM FA 500.3 english Keep in a safe place for future use! 1.990.999.110 – 1005...
-
Page 2: Table Of Contents
FA 500.3 Contents Proper use, warranty ........................3 Safety instructions ........................3 Overview ...........................4 Dimensions ..........................5 Transportation, installation ......................6 Operating and display elements ....................7 Start-up .............................7 Malfunctions ..........................9 Maintenance and care ......................11 Disposal / Recycling ........................12 Scope of supply, accessories ....................12 Technical data .........................13... -
Page 3: Proper Use, Warranty
CDs and hard The document shredder is supplied as a single or credit cards. combined machine (with an HSM baling press). Please Danger of injury during intake observe the applicable instructions in the operating manual. Do not go near the paper feed open- Our general business conditions are applicable. -
Page 4: Overview
FA 500.3 Overview HSM GmbH + Co. KG Austrasse 1-9 88699 Frickingen / Germany Main switch (only solo-version) Safety instructions Operating and display elements Emergency stop switch bar Loading tray Intake conveyor Braking swivel castors Nameplate Oil reservoir opening 1005... -
Page 5: Dimensions
FA 500.3 Dimensions 1168 1769 1791,5 HSM FA 500.3 3300 1000 Space requirements for operation and maintenance 1005... -
Page 6: Transportation, Installation
FA 500.3 Transportation, installation • Insert the plug (connection for emergency stop switch bar) into the socket next to the main switch and turn it • During transport, observe the high centre of gravity of to stop. the paper shredder! •... -
Page 7: Operating And Display Elements
FA 500.3 Operating and display elements R button: Cutting unit runs in reverse Baling press operating status (only for combined machines) Indicator: Door open or Indicator: oil reservoir empty emergency stop was pressed Function button “On/off/start” Indicator: Level 1 Indicator: Level 2 * overload... - Page 8 FA 500.3 Switching on the paper shredder Inspecting the door switch • Activate the emergency stop control by pushing the • Open the front door. switch bar away from the machine. • Solo-version: Turn the main switch to the I position.
-
Page 9: Malfunctions
FA 500.3 Shredding material Stopping the shredder • Press the start button again. The cutting block and feed belt stop. The shredder switches to standby mode. Switching off the shredder • Turn the main switch on the paper shred- der or the baling press to 0. - Page 10 FA 500.3 Electric motor overheated Note for machines with 1.9 x 15 mm cutting widths: “Overload” display (level 1 or level 2 – de- Machines with the safety level 4 contain a two-level pending on the machine model) fl ashes.
-
Page 11: Maintenance And Care
FA 500.3 Maintenance and care Tightening the feed belt The feed belt should not slip when loaded with material. Cleaning the shredder: • Switch off the shredder. • Switch off the shredder and disconnect the power plug. • Only use a soft cloth and mild soapy water for cleaning. -
Page 12: Disposal / Recycling
As legislation is subject to ongoing changes, we request that you contact your local authorities at the appropriate time. As the manufacturer, HSM would be glad to advise you on the disposal of your old machine. 1005... -
Page 13: Technical Data
Volume of the shredded paper container 530 l (2 x 265 l) EC declaration of conformity The manufacturer HSM GmbH + Co. KG, Austrasse 1 - 9, D-88699 Frickingen hereby declares that the machine, referred to here as document shredder HSM FA 500.3... -
Page 14: Electric Wiring Diagrams
FA 500.3 13 Electric wiring diagrams Legend: =AV: Shredder in switch cabinet +MA: on machine +BF: Keypad Solo 400 V / 50 Hz 1005... - Page 15 FA 500.3 1005...
- Page 16 FA 500.3 1005...
- Page 17 FA 500.3 1005...
- Page 18 FA 500.3 1005...
-
Page 19: Cut Size 1.9 X 15 Mm
FA 500.3 Solo Cut size 1.9 x 15 mm 400 V / 50 Hz 1005... - Page 20 FA 500.3 1005...
- Page 21 FA 500.3 1005...
- Page 22 FA 500.3 1005...
- Page 23 FA 500.3 1005...
- Page 24 Tel. +44(0) 1543.272.480 +44(0) 1543.272.080 info@hsmuk.co.uk www.hsmuk.co.uk HSM of America LLC 419 Boot Road Downingtown, PA 19335 HSM GmbH + Co. KG Austrasse 1-9 Tel. (610) 918-4894 88699 Frickingen / Germany (800) 613-2110 (610) 918-4899 Tel. +49 7554 21 00-0 customerservice@hsmofamerica.com...
Need help?
Do you have a question about the FA 500.3 and is the answer not in the manual?
Questions and answers