HSM Powerline FA 400.2 Operating Instructions Manual
Hide thumbs
Also See for Powerline FA 400.2:
- Operating manual (20 pages) ,
- Operating manual (23 pages)
Related Manuals for HSM Powerline FA 400.2
Summary of Contents for HSM Powerline FA 400.2
- Page 1 FA 400.2 For More Info Click Here ---> OPERATING MANUAL SHREDDER Powerline FA 400.2 english 1.513.999.112 B – 08/2013 http://www.monomachines.com/...
-
Page 2: Table Of Contents
Transportation, installation ......................6 Operating and display elements ....................7 Start-up .............................7 Malfunctions ..........................9 Maintenance and care ......................10 Disposal / Recycling ........................ 11 Scope of supply, accessories ....................11 Technical data .........................12 For More Info Click Here ---> Powerline FA 400.2 08/2013 http://www.monomachines.com/... -
Page 3: Proper Use, Warranty
Maintenance and service tasks may only be HSM press. performed by HSM customer service and Before using the machine for the fi rst time, service engineers of our dealers. read the operating manual, and keep it for later use and to pass on to any subsequent users. -
Page 4: Overview
Emergency stop button Loading tray Option: extra-wide work table Left cover panel Right cover panel Intake conveyor, paper feed opening Front door Braking swivel castors Oiler on particle cut machines Nameplate For More Info Click Here ---> Powerline FA 400.2 08/2013 http://www.monomachines.com/... -
Page 5: Dimensions
FA 400.2 Dimensions For More Info 1157 Click Here ---> 1564 HSM FA 400.2 Solo version 1157 1644 HSM FA 400.2 Combi version 1262 2414 Transportation dimensions (without tray) Space requirements for operation and maintenance Powerline FA 400.2 08/2013... -
Page 6: Transportation, Installation
- Connect the power plug of the shredder to the com- bination socket of the baling press. • The machine must be connected to a power source which meets the specifi cations on the nameplate. For More Info Click Here ---> Powerline FA 400.2 08/2013 http://www.monomachines.com/... -
Page 7: Operating And Display Elements
Turn off the main switch immediately and pull out the power plug! Have an electrician change two of the three phase wires For More Info Click Here ---> Powerline FA 400.2 08/2013 http://www.monomachines.com/... - Page 8 • Pull the waste trolley out and change the cut material sack. • Push the trolley back in and start the shredder again by pressing the green start button. For More Info Click Here ---> Powerline FA 400.2 08/2013 http://www.monomachines.com/...
-
Page 9: Malfunctions
• Press the green start button. Door open The red LED on the keypad lights up. The shredder switches off automatically. • Close the front door. • Press the green start button. For More Info Click Here ---> Powerline FA 400.2 08/2013 http://www.monomachines.com/... -
Page 10: Maintenance And Care
FA 400.2 WARNING Maintenance and care Service work may only be carried out by HSM Customer Service or by the service Cleaning the cutting block technicians of our contractual partners. Strip cut machines: (1 x daily) • Switch off the shredder. -
Page 11: Disposal / Recycling
(1) on the left and authorities at the appropriate time. As the manufacturer, right sides of the HSM would be glad to advise you on the disposal of your snub roller. old machine. • Loosen the lock nuts (2) of the tensioning bolts (3). -
Page 12: Technical Data
EC Declaration of Conformity Click Here ---> The manufacturer HSM GmbH + Co. KG, Austraße 1 - 9, 88699 Frickingen / Germany hereby declares that the machine document shredder HSM FA 400.2 corresponds to the health and safety requirements of the following EC directives listed below due to its conception and design of...
Need help?
Do you have a question about the Powerline FA 400.2 and is the answer not in the manual?
Questions and answers