Using Receive Modes; Fax Only; Fax/Tel; Manual - Brother MFC-9340CDW User Manual

Using receive modes

Some receive modes answer faxes
automatically (Fax and Fax/Tel). You may
want to change the Ring Delay before using
these modes (see Ring Delay on page 42).

Fax Only

Fax mode will automatically answer every
call as a fax.

Fax/Tel

Fax/Tel mode helps you manage incoming
calls, by recognising whether they are fax or
voice calls and dealing with them in one of the
following ways:

Faxes will be automatically received.

Voice calls will start the F/T ring to tell you
to pick up the line. The F/T ring is a fast
double-ring made by your machine.

Use this mode if you receive few voice
calls.
(Also see F/T Ring Time (Fax/Tel mode only)
on page 42 and Ring Delay on page 42.)

Manual

5
Manual mode turns off all automatic
answering functions unless you are using the
Distinctive Ring feature
1
Fax Ability in New Zealand.
To receive a fax in Manual mode lift the
handset of the external telephone or press
5
(Fax) and then press Hook. When you
hear fax tones (short repeating beeps), press
Fax Start, and then press Receive to
receive a fax. You can also use the Fax
5
Detect feature to receive faxes by lifting a
handset on the same line as the machine.
(Also see Fax Detect on page 43.)
If you use a computer modem on the same
line, Faxing will not operate correctly.

External TAD

External TAD mode lets an external
answering device manage your incoming
calls. Incoming calls will be dealt with in the
following ways:

Faxes will be automatically received.

Voice callers can record a message on the
external TAD.
(For more information, see Connecting an
external TAD on page 54.)
Receiving a fax
5
1
.
5
41
5