Changing The Default Settings For Direct Print - Brother MFC-9340CDW User Manual

Chapter 10
d
Do one of the following:

Press Print Settings. Go to
step e.

If you do not want to change the
current settings, go to step h.
e
Swipe up or down, or press a or b to
display the setting you want.
f
Press the option you want.
NOTE
• You can choose the following settings:
Paper Type
Paper Size
Multiple Page
Orientation
2-sided
Collate
Print Quality
PDF Option
• Depending on the file type, some of
these settings may not appear.
g
Do one of the following:

To change another setting, repeat
step e.

If you do not want to change other
settings, press OK and go to step h.
h
Enter the number of copies you want
using the touchpanel.
i
Press Colour Start or Mono Start
to print the data.
j
Press .
68
IMPORTANT
• To prevent damage to your machine, DO
NOT connect any device other than a
digital camera or USB Flash memory drive
to the USB direct interface.
• DO NOT remove the USB Flash memory
drive or digital camera from the USB direct
interface until the machine has finished
printing.
Changing the default settings
for direct print
You can change the default settings for Direct
Print.
a
Connect your USB Flash memory drive
or digital camera to the USB direct
interface on the front of the machine.
b
Press Direct Print.
c
Press DefaultSettings.
d
Swipe up or down, or press a or b to
display the setting you want.
Press the setting.
e
Press the new option you want. Repeat
steps d and e for each setting you
want to change.
f
Press OK.
g
Press .
10