Brother MFC-9340CDW User Manual page 69

Changing the Remote Codes
The preset Remote Activation Code is l51
(l91 for New Zealand). The preset Remote
Deactivation Code is #51 (#91 for New
Zealand). If you are always disconnected
when accessing your External TAD, try
changing the three-digit remote codes, for
example ### and 555.
a
Press .
b
Press All Settings.
c
Swipe up or down, or press a or b to
display Fax.
d
Press Fax.
e
Swipe up or down, or press a or b to
display Setup Receive.
f
Press Setup Receive.
g
Swipe up or down, or press a or b to
display Remote Codes.
h
Press Remote Codes.
i
Do one of the following:

If you want to change the
Remote Activation Code, press
Act.Code. Enter the new code, and
then press OK.

If you want to change the
Remote Deactivation Code, press
Deact.Code. Enter the new code,
and then press OK.

If you do not want to change the
Codes, go to step j.

If you want to turn the Remote Codes
On or Off, press Remote Codes.
Press On or Off.
j
Press .
Telephone and external devices
7
7
59