Tevion DIGITAL MINI SATELLITE SYSTEM User Manual page 26

Drill the four boreholes. The size of the bore holes must
correspond to the dowels which are used.
Countersink the four steel dowels into the boreholes.
Put the base on the place of its installation and fasten it with the
four screws.
To achieve a safe wall installation, use a plain washer for
each screw.
After the cabling of the satellite system the antenna can be
directed to the desired satellite. For this, please proceed as
described in the section "Direction of the antenna" on page 37.
Caution!
Consider that the installation on a wall can be compared with a fix
installation. Therefore, it can alter the surface of the wall.
Before boring make sure that no conductions, tubes, etc. will be
damaged.
26
Helpline No. UK/Northern Ireland 01422 263270 Rep. Ireland 1890 812049
28