Installation on a table
Place the installed antenna on a table. The base of the antenna
must be entirely placed on the table surface.
After the cabling of the satellite system the antenna can be
directed to the desired satellite. For this, please proceed as
described in the section "Direction of the antenna" on page 37.
Put sufficient weight on the base, e.g. books, to avoid
tipping over of the antenna by an unintentional external
influence (e.g. wind).
The antenna can alternatively be installed on a table leg.
For doing this, please proceed as described in the section
"Installation on a mast.
Should the table be in a room, make sure to put it near an
open window to ensure optimum reception.
Caution!
You can protect the sensitive surface from scratches and pressure
marks by placing a piece of felt, cardboard or similar on it.
22
Helpline No. UK/Northern Ireland 01422 263270
Rep. Ireland 1890 812049
24
Need help?
Do you have a question about the DIGITAL MINI SATELLITE SYSTEM and is the answer not in the manual?