Operation And Adjustments - Exerpeutic Inversion Table Owner's Manual

OPERATION AND
ADJUSTMENTS
SHORTEN LENGTHEN
THE STRAP
For added safety, a nylon strap has been included to restrict the degree of
inversion. This strap can be adjusted to different lengths to allow for a greater
or lesser degree of inversion. To lengthen the Nylon Strap (23) feed the top
end of Nylon Strap (23) into the strap lock, and pull on the lower end of the strap.
To shorten the length feed the bottom end of Nylon Strap (23) into the strap lock,
and pull on the top end.
ADJUSTING THE BOOM
The Adjustable Boom (3) can be moved to a variety of different positions, in order
to accommodate the height of the person on the inversion table. To adjust the
Adjustable Boom (3) pull out the Adjustable Boom Knob (41), and slide the
Adjustable Boom (3) up or down until the desired height on the height scale is
positioned just below the Backrest Frame (2). When the Adjustable Boom (3) is
in the desired position, simply release the Adjustable Boom Knob (41), slide the
Adjustable Boom (3) slightly up or down until the Adjustable Boom Knob (41)
locks into place.
15