Exerpeutic Inversion Table Owner's Manual page 10

ASSEMBLY
Tool:
Allen Wrench #6
1 Wrench (#13 & #17)
Step 2:
Attach the Handlebar (6) onto the Rear Frame (8) with two M8x60mm Hexagon
Socket Head Cap Bolts (20), two M8 Nut Caps (24), and four Ø16xØ8.5x1.5 Flat
Washers (19). Tighten bolts and nut caps with the Wrench and Allen Wrench
provided. Repeat above same step to attach the other Handlebar (6) onto the
Rear Frame (8).
Hardware:
(19) Flat Washer (20) Hexagon Socket Head (24) Nut Cap M8
Ø16xØ8.5x1.5 Cap Bolt M8x60mm 4 PCS
8 PCS 4 PCS
9