Subscribe to Our Youtube Channel
Related Manuals for DSPPA DSP1501
Summary of Contents for DSPPA DSP1501
- Page 1 Public Address Device DSP1501 Phased Array Column Speaker Operation Manual Welcome to use our Public Address System. For better use of this equipment, please read this manual carefully before use.
-
Page 2: Table Of Contents
Contents The subassemblies of Phased-array Column Speaker ..........1 1. Product Description...................... 2 2. Functions ........................2 3. Description of Remote Controller Keypad ..............2 4. Installation Diagram ...................... 3 5. Description of Back Ports..................... 3 6. Description of Remote Controller Keypad ..............4 7. -
Page 3: The Subassemblies Of Phased-Array Column Speaker
* Public Address System Operating Instructions The subassemblies of Phased-array Column Speaker: Infrared remote controller RCA connector Speaker fixing screws x 2 XLR connector - male XLR connector - female... -
Page 4: Product Description
* Public Address System Operating Instructions 1. Product Description The phased-array column speaker is a new type of public address device. By applying the electronic and digital signal processing (DSP) technologies, it can simulate the directivity of different shapes of column speakers, while the inherent performances of the phased-array column speaker will not be affected, e.g. -
Page 5: Installation Diagram
* Public Address System Operating Instructions 4. Installation Diagram: 1. Select a proper position on the surface where the column speaker is to be installed, and fix two screws ø8mm. As shown on right, mount the bracket and fix the column speaker. 2. -
Page 6: Description Of Remote Controller Keypad
* Public Address System Operating Instructions 6. Description of Remote Controller Keypad 1. Mute key 2. Sensitivity selection key (Sensitivity) 3. Volume setting key (V+) for increase and (V-) for decrease 4. Directivity setting key (AN+) for increase and (AN-) for decrease 5. - Page 7 * Public Address System Operating Instructions ±12dB). After finishing the adjustment, press “EQ” to exit. 4. Directivity Adjustment Directivity Interface Press “AN+ or AN-” (Increase or decrease the directivity angle. The range of adjustment is as shown below). +45º -45º 0º...
-
Page 8: Specifications
Under screen saver status, you may press any key from remote controller to enter into associated operating interface. 8. Specifications Model DSP1501 Rated power 100W 00dBV, -06dBV, -10dBV /70-100V Input sensitivity ±45º...
Need help?
Do you have a question about the DSP1501 and is the answer not in the manual?
Questions and answers