Troubleshooting; Troubleshooting Guide - Kenmore 592-857130 Use & Care Manual

Table of Contents

Advertisement

Available languages

Available languages

Troubleshooting

Troubleshooting guide

Before you call a repair person for your oven, check this list of possible problems and solutions .
Fan comes on by it self
Vent fan comes on automatically when cooking on the range or cooktop .
Neither the oven's display nor the oven operate.
Properly insert the plug into a grounded outlet .
If the outlet is controlled by a wall switch, make sure the wall switch is turned on .
Remove the plug from the outlet, wait ten seconds, then plug it in again .
Reset the circuit breaker or replace any blown fuse .
Plug another appliance into the outlet; if the other appliance doesn't work, have a qualified electrician repair
the outlet .
Plug the oven into a different outlet .
The oven's display including the clock works, but the power won't come
on.
Make sure the door is closed securely .
Check to see if packing material or other material is stuck to the door seal .
Check for door damage .
Press
STOP/CLEAR pad twice and re-enter all cooking instructions .
The power goes off before the set time has elapsed.
If there has not been a power outage, remove the plug from the outlet, wait ten seconds, then plug it in
again . If there was a power outage, the time indicator will display: PLEASE TOUCH CLOCK AND SET
TIME OF DAY. Reset the clock and any cooking instructions .
Reset the circuit breaker or replace any blown fuse .
The food is cooking too slowly (The food is not cooking evenly or
completely.)
Make sure the oven is on its own 20 amp circuit line . Operating another appliance on the same circuit can
cause a voltage drop . If necessary, move the oven to its own circuit .
Too low power level makes the food to be not cooking enenly, form time to time .
If you select incorrect sensor cooking item or utensil, the food will be not cooking evenly .
You see sparks or arcing.
Remove any metallic utensils, cookware, or metal ties . If using foil, use only narrow strips and allow at least
one inch between the foil and interior oven walls .
MD5_XAC-03653B_EN+FR.indb 33
33
2009-05-11
3:17:22

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents