Do not plug the printer
into an outlet
controlled by a wall
switch or timer, or on
the same circuit as a
large appliance. This
may disrupt the power,
which can erase the
printer's memory and
damage the power
Plug In the Printer
First make sure the power is off. Check the
button; it's off when its surface is even with the button
guards on each side.
Plug the power cord into a properly grounded outlet. To
protect the printer from power surges, you may want to
use a surge protector.
Install the Ink Cartridges
Operate and Ink Out lights come on and the ink
cartridge holders move to the installation position. The
Pause light begins flashing.
Open the cover. The Cover Open light comes on.
Operate button to turn on the printer. The