You'll also find diskettes
for the EPSON Plot! utility
printer box. (These utilities
are also on the CD-ROM.)
You don't need to install
these utilities unless you
need to. See page 1 of
the Introduction to your
User's Guide for details.
Install the Printer Software
Now you need to install the printer software so you can
control printing from your computer.
Installing on a PC
You can install the printer software for Windows
Windows 3.1, or Windows NT
printer software CD-ROM. If you don't have a CD-ROM drive,
you can create diskettes from the CD-ROM using another
The installation instructions are slightly different for each
Windows version. See the sections below for your operating
Windows 95 Plug-and-Play
Turn on your printer, then turn on your computer.
At the New Hardware Found screen, make sure your
printer name is displayed and the Driver from disk
provided by hardware manufacturer button is selected.
Then click OK. (If you don't see the New Hardware
Found screen, see "While Running Windows 95" below.)
Insert the EPSON printer software CD-ROM or diskette.
Type D:\ or A:\ (or the correct drive letter) and click OK.
At the next screen, keep or change the printer model
name. Then select Yes (No is the default) to use the
printer as the Windows default printer. Click Finish.
Follow the instructions on the screen. Your printer
software icons appear in an EPSON folder and a printer
icon appears in the Printers folder.
3.51/4.0 from the EPSON