Welcome; Congratulations - Heatilator C40 Owner's Manual

1

Welcome

A. Congratulations
Congratulations on selecting a Heatilator wood burning
fi replace. The Heatilator fi replace you have selected is
designed to provide the utmost in safety, reliability, and
effi ciency.
As the owner of a new fi replace, you'll want to read and
carefully follow all of the instructions contained in this
Owner's Manual. Pay special attention to all Cautions and
Warnings.
DEALER: Fill in
your name, address,
phone and email
information here and
fi replace information
below.
Fireplace Information:
Brand: ________________________________________________ Model Name: ___________________________
Serial Number: __________________________________________ Date Installed: __________________________
Listing Label Information/Location
LISTED FIREPLACE, SOLID FUEL TYPE, ALSO SUITABLE FOR MANUFACTURED
HOME INSTALLATION
Install and use only in accordance with manufacturer's installation, venting and operating instructions.
Any area incorporating warm or cold air ducts shall be enclosed in accordance with the manufacturer's
installation instructions.
Contact Your Local Building Or Fire Of ficials Or Authority Having Jurisdiction About Restrictions,
Installation Inspection And Permits Required In Your Area.
WARNING - For Manufactured Homes : Do not install in a sleeping room.
inlet must be provided and unrestricted while unit is in use.
home floor, ceiling and walls must be maintained.
frame of the manufactured home.
Components required for installation: HTI SLSeries Pipe,
accessory Chimney Air Kit Part CAK4A.
Do not connect this unit to a chimney serving another appliance.
DANGER: Risk of electrical shock. Disconnect power supply before servicing.
Electrical Rating: 115 VAC <3.0 AMPS 60 Hz
Do not use grate or elevate fire. Build wood fire directly on firebrick.
Do not overfire. If heater or chimney connector glows, you are overfiring.
Do not use a fireplace insert or other products not specified for use with this product.
WARNING - THIS FIREPLACE HAS NOT BEEN TESTED WITH AN UNVENTED GAS LOG SET OR ANY LOG SET.
TO REDUCE RISK OF FIRE OR INJUR Y, DO NOT INSTALL AN UNVENTED GAS LOG SET OR ANY LOG SET INTO
FIREPLACE.
Must provide a source of air to prevent air starvation from combustion which could result of high levels of
carbon monoxide.
Replace glass only with 5mm ceramic available from your dealer.
Optional Fire Screen. Part SCR-433, may be used ONLY in USA
Mfg by:
Read this manual before installing or operating this fi replace.
Please retain this owner's manual for future references.
Local Dealer Information
Dealer Name: ________________________________________________________
Address: ____________________________________________________________
____________________________________________________________
Phone: _____________________________________________________________
Email: _____________________________________________________________
O-T L
Tested and Portland
Oregon USA
Listed by
C US
OMNI-Test Laboratories, Inc.
OMNI-Test Laboratories, Inc.
Report #061-S-50-2
A division of Hearth & Home Technologies Inc.
TESTED TO
7571 215th Street Wset, Lakeville, MN. 55044
www.heatilator.com
UL 127, ULC-S610-M87
. (UM) 84 HUD. "For Use with Solid Wood Fuel Only."
The structural integrity of the manufactured
The fireplace needs to be properly grounded to the
Termination Cap, Hearth Extension and required
U.S. ENVIRONMENTAL PROTECTION AGENCY - Certified to comply with July 1990 particulate emission standards.
2011 2012 2013 Jan Feb Mar Apr May June July Aug Sept Oct. Nov. Dec.
DO NOT REMOVE THIS LABEL
Heatilator • Constitution Owner's Manual • 480-2330 • Rev B 1-29-13
This Owner's Manual should be retained for future refer-
ence. We suggest that you keep it with your other impor-
tant documents and product manuals.
Your new Heatilator wood burning fi replace will give you
years of durable use and trouble-free enjoyment. Wel-
come to the Heatilator family of fi replace products!
Heatilator is a registered trademark of Hearth & Home
Technologies.
The model information regarding your specifi c fi replace can be found on
the rating plate usually located in the control area of the fi replace.
Model:
C
ONSTITUTION
E C F
PA ERTIFIED IREPLACE
Minimum Clearances To Combustible Material
Chimney sections at any level require a 2 inches (51mm)
minimum air space clearance between the framing and
chimney section.
WITHIN ENCLOSURE AREA
Appliance to backwall
Appliance to sidewall
An outside combustion air
Duct boots to framing
Top standoffs to header
EXPOSED SURFACES
Faceplate to sidewall
Remote outlet air grills to ceiling
MANTEL
Mantel from base of fireplace
Maximum mantel depth
FLOOR PROTECTION
Combustible flooring 20 inches (508mm) in front of and 8 inches
(203mm) to either side of the fuel opening must be insulated with
non-combustible floor protection with a minimum thickness of 1
inch (25mm) and ("k" value = 0.43, minimum R value = 2.06).
In Canada: The hearth extension must be installed according to
the installation instructions.
Made in U.S.A. of US and imported parts
Serial No / Numéro De Série
009
Serial Number
1" (25mm)
1" (25mm)
Model Number
0" (0mm)
0" (0mm")
16" (406mm)
12"(305mm)
60" (1524mm)
12" (305mm)
480-1110i
3