Control Frame Sounds; Video Settings; Restore Original Settings; Automatic Off - Bose VIDEOWAVE Operating Manual

Hide thumbs Also See for VIDEOWAVE:
Table of Contents

Advertisement

TAB 8
TAB 7
C
S
S
HANGING
OURCE AND
YSTEM

Control Frame Sounds

Provides audible feedback when you glide your thumb
along the click pad or select a highlighted function.
On* ..................Sound accompanies the movement of your
thumb on the click pad
Off ...................No click pad sounds

Video Settings

Provides video presets for normal and dark ambient
light conditions.
Normal* .......... Optimized for most lighting conditions
Dark Room ...... Optimized for especially dark lighting
conditions
Basic video adjustments
The bright and dark room video presets were optimized
at the factory. However, if you choose to make
adjustments:
1. While "Video Settings" is highlighted, press and
hold the OK button on the remote to access the
basic video adjustments for the preset.
Brightness, Contrast,
Color, and Tint .............. 0 to 100 (50* Bright), (50* Dark)
Video Sharpness........... 0 to 3 (2*)
Monitor Backlight ......... 0 to 10 (6* Bright), (3* Dark)
Color Temperature ....... 1* to 3
2. Use the up/down navigation buttons to select the
item. Use the left/right navigation buttons to adjust
the value.
*Factory setting
24
TAB 6
TAB 5
O
PTIONS
TAB 4
TAB 3
3. Press OK to return to the OPTIONS menu.
Gamma and color adjustments
Note: We recommend that these adjustments be made
by a qualified technician.
1. Access the basic video settings as previously
explained.
2. Press and hold OK again to toggle between the
basic video settings and the Gamma and color
settings.
3. Use the navigation buttons to adjust.
Gamma.................................................-3 to 0* to +3
Adjusts the balance between the
bright and dark areas of the picture
Red, Green, and Blue gain ...................0 to 100*
Red, Green, and Blue cut .....................0* to 100

Restore Original Settings

Returns the video settings to factory values.

Automatic Off

Automatically turns the system off.
Enabled*................ The system turns off automatically after 4
hours of no remote control button pushes,
or 20 minutes of no audio or video signal
Disabled ................ No automatic off feature
TAB 2
English

Advertisement

Table of Contents
loading

Table of Contents