Appendix A - Lcd Messages - Oki C9600n User Manual

A
PPENDIX
The LCD panel messages are intended to be self-explanatory.
Representative messages are given as examples below.
MESSAGE
Ready to Print
Printing tttttt
tttttt Near End
cccccc Toner Low
Fuser Unit Near Life
Change Fuser Unit
Inverter is Removed
Invalid Data
Press ONLINE Button
Change Paper in tttttt
mmmmmm
pppppp
Press ONLINE button
Please see HELP for
details
Install Paper
tttttt
mmmmmm
Please see HELP for
details
Install Tray
tttttt
A – LCD M
COMMENT
Your printer is online and ready to print.
Your printer is printing and paper is currently being
fed from tttttt, where tttttt identifies a tray.
The paper supply in the tray identified by tttttt will
run out soon.
The remaining toner of colour cccccc is running low.
The fuser unit is nearing the end of its working life.
The fuser unit has reached the end of its working
life and has to be changed.
The Inverter unit has been separated from the
printer and all Finisher functions are disabled.
(Finisher/Inverter is an optional accessory.)
Invalid data has been received by the printer. Press
the ONLINE button to clear this warning.
There is a mismatch between the media in the tray
and print data.
Load media of size mmmmmm and type pppppp
into tray tttttt. The message may remain for some
time after you have closed the tray.
You can have the printer ignore this error for the
current print job by pressing the ONLINE button.
You can access help details by pressing the HELP
button.
The printer has tried to take paper from an empty
tray.
Load media of size mmmmmm into tray tttttt. The
message may remain for some time after you have
closed the tray.
You can access help details by pressing the HELP
button.
The printer has tried to take paper from a tray that
has been removed.
Ensure that tray tttttt is correctly located or put tray
tttttt loaded with paper back into the printer.
C9600 User's Guide> 107
ESSAGES