Bond GSF2818KH Owner's Manual page 11

S tep13 (Place the gas tank)
a) Place the gas tank on the gas holder clip it using
the tank clip (G).
b) Connect the tank with regulator by screwing
regulator collar onto the tank valve. Conduct
the leaking test on page 12.
GSF2818KH
Owner's Manual
Step 11 (Install the side burner and side burner
frame)
a) Align the holes on the side burner support (N)
with the holes on the right side shelf (P).
b) Screw the M4 x 15 bolt (DD), M4 flat washer
(GG) and M4 lock washer (FF) into each
pre-drilled holes by screwdriver provided.
c) Put the side burner (O) upon the side burner
frame (N).
DD M4 x 15 Bolt
GG M4 flat washer
FF M4 lock washer
Step 12 (Install the heating plate, cooking grid and warming
rack)
a) Place the heating plates (M) upon burners.
b) Put the cooking grid (L) upon the heating plates.
c) Put the warming rack (K) on the side walls of firebox.
d) Close the top lid.
10
4 PCS
4 PCS
4 PCS