Bond GSF2818KH Owner's Manual page 10

Step 8 (Install the body assembly with cart assembly)
a) Put the body assembly (B) onto the cart assembly.
b) Align the holes on the body assembly with the holes on
the cart assembly.
c) Insert the M6 x 15 bolt (AA), M6 flat washer (BB) and M6
lock washer (CC) into pre-drilled holes, then tighten the
bolts by hand.
d) Go back and tighten all the bolts using the screwdriver
provided.
AA M6 x 15 Bolt
BB M6 flat washer
CC M6 lock washer
AA M6 x 15 Bolt
BB M6 flat washer
CC M6 lock washer
Step 10 (Install the valve with side knob and knob support)
a) Align the holes on the side knob support (R) with the
hole on the front of the right side shelf and side burner
valve. Insert one M4 x 10 bolt (EE) and one M4 Flat
washer (FF) into the pre-drilled holes.
b) Tighten all the bolts using the screwdriver provided
c) Press the knob (S) onto the side knob support (R).
EE M4 x 10 Bolt
BB M4 flat washer
GSF2818KH
Owner's Manual
4 PCS
4 PCS
4 PCS
10 PCS
10 PCS
10 PCS
2 PCS
2 PCS
Step 9 (Side shelves assembly)
a) Align the holes on the right side shelf
b) Insert one M6 x 15 bolt (AA), one M6
c)
d) Go back and tighten all the bolts using
9
(P) with the holes on the body
assembly.
lock washer (CC) and one M6 flat
washer (BB) into each pre-drilled
holes by hand.
Repeat the same procedure with the
left side shelf (A) and body assembly.
the screwdriver provided.