Select Options; Press Start/Stop And Close The Door - Asko D5644 Operating Instructions Manual

Dishwashing
6

Select options

To select an option, press one of the option
buttons. The field under the button lights when
the option is activated. The available options depend
on the selected program. Once you have started the
program, the options you selected are saved for the
next time you use the same program. An exception
is the Delayed start option.
Temperature
The Temperature option button allows you to select
a higher or lower temperature for the main wash. If
you want to improve dishwashing efficiency, activate
the option for a higher temperature. This option
remains selected until changed.
You can vary the temperature as shown below:
Heavy wash:
Normal wash:
Daily wash:
Quick wash:
Super Quick:
Delicate wash:
Eco wash:
Drying
Press the Drying option button for improved drying
results. The temperature increases during the final
rinse, which improves drying results but increases
program time and energy consumption. If you want a
program with Short dry, press it again and the field
under the button turns off. This option can be used
with all programs except Auto wash, Time program,
Rinse & Dry and Rinse & Hold.
18
55 °C/ 70 °C
45 °C/ 65 °C
60 °C/ 65 °C
30 °C/ 60 °C
30 °C/ 60 °C
40 °C/ 50 °C
55 °C/ 60 °C
Delayed start
When you select Delayed start, the dishwasher will
start 1–24 hours after you press the Start/Stop button.
1. Press the button once to activate Delayed start.
Press the button several times – or hold it in – to
set the desired number of hours.
2. Press Start/Stop and the dishwasher counts down
1 hour at a time and starts after the selected delay.
Press and hold Start/Stop for three seconds if you
want to cancel the Delayed start option.
NOTE!
Remember to press the Start/Stop button to start
the program.
Set time
Press the option button several times – or hold it in –
to set the desired program time for Time program.
You can choose a program time between 30 minutes
and 3 hours.
7
Press Start/Stop and close the
door
The display flashes three times with the
remaining time to indicate that the program has
started. Close the door properly otherwise the
dishwasher will not start. The display indicates
if the door is open.
NOTE!
If the machine does not start within 2 minutes of the
last button press, the display returns to showing the
last program run.
Stopping or changing a program
If you want to change program after starting the
dishwasher, open the door then press and hold
Start/Stop for three seconds. Add more detergent if
the lid of the detergent dispenser has opened. Then
choose a new program, press Start/Stop and close
the door.