Set The Correct Plinth Depth As Follows; Screwing The Dishwasher Into Place - Asko D5644 Operating Instructions Manual

Installation
Set the correct plinth depth as
follows
1. Attach the supplied soundproofing material to the
back of the toe kick (certain models only). If you
use the low toe kick, adjust the height of the
soundproofing by removing the thinner part of the
strip.
Adjust soundproofing material height
2. Squeeze together the grey catches and pull out
the holders to the desired depth. Push in the
catches to lock the holders into place.
3. Hang the toe kick on the holders by inserting it into
the notches.

Screwing the dishwasher into place

(Applicable only to built-in dishwashers.)
After fastening the machine, check that the front feet
still touch the floor.
37