Viking 100 Series Installation Manual page 27

100 series built-in dishwasher
Hide thumbs Also See for 100 Series:
Table of Contents

Advertisement

Installation
Adjusting Door Tension with
Custom Wooden Door
• Check the door tension of the
dishwasher; if the door closes too
quickly or if the door falls open, the
spring tension needs to be adjusted.
• The adjustment screws can be found
on the front of the dishwasher after
you open the door (see drawing).
• Adjust the spring tension by turning
the screw to the right for more
weight and to the left for less weight.
(Figure C).
26
11. Check whether
the bottom of
the door hits the
kickplate of the
kitchen cabinet
(Figure A).
11. 1. If the door
hits the
kickplate, cut
the necessary
section out of
the kickplate
(Figure B).
11. 2 Apply silicon
or sealant to the
cut edge of the
kitchen cabinet
kickplate or
paint so it does
not absorb
moisture.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fdw100Fdw100ws

Table of Contents