Installation Preparation
Steam Protection Foil
Steam will form inside the dishwasher during operation. At the end of the cycle, when the
dishwasher door is opened, it is required to use a steam protection foil to prevent any steam
from collecting on the underside of the counter top.
B
Fitting the Protection Foil
• Before applying the steam protection foil
to the underside of the countertop, clean
the area with a damp cloth (as shown in
Figure A). Once the area dries, apply the
steam protection foil.
• The steam protection foil will be applied
at the location where the hot steam
escapes when you first open the door (as
shown in Figure B).
A
Steam protection foil must be applied
where the steam escapes when door is
first opened. Failure to install the steam
protection foil during installation can
lead to damage to to the cabinets and
countertop.
14
CAUTION