Table of Contents
Advertisement
10
Remote Operation
When the switch on the battery holder is set to "REMOTE" the transmitter operates the fireplace. Once
you understand how the transmitter works, you will be able to operate your fireplace quickly and easily.
Display Overview
The transmitter display has four main sections (see below).
ON
Listen for the "Beep"
Each time you press a button on the transmitter that controls the fireplace, a "beep" will sound from the
IFC. When you change thermostat target settings the IFC will not beep.
NOTE: When the batteries start to get low, the IFC will beep twice whenever a button is pressed. When
the batteries are nearly depleted, the IFC will no longer beep. See "IFC Batteries" on page 13).
© Travis Industries
Thermostat Display
F
Operation
Room Temperature Display
Read-Out (Thermostat Setting, Function, etc.)
Mode Display (Flame, Blower, Light)
4140115
100-01369
Advertisement
Table of Contents
