Table of Contents
Advertisement
Number Item
6
USB 2.0 (4)
7
Kensington Lock
Slot
8
Fan
Installing the NSS322
3
Please place your NSS322 on a desktop or flat surface.
Placement Tips
• Ambient Temperature—To prevent the device from overheating, do
not operate it in an area that exceeds an ambient temperature of 104°F
(40°C).
• Air Flow—Be sure that there is adequate air flow around the device.
Avoid any obstructions to air flow either in front of or behind the chassis.
• Mechanical Loading—Be sure that the device is level and stable to
avoid any hazardous conditions. Do not place any other devices on top
of the NAS.
• Vibration/Impacts—Be sure that the device is installed in a location
where it will not be subject to vibration or impact.
Installing the Disk Drives
4
When storing unused disk drives, do not stack multiple disk
C
AUTION
drives because this can cause drive failures.
When installing the disk drives, follow the suggestions in
Electrostatic Discharge and Grounding Best Practices
product CD.
Follow these steps to install disk drives in the NSS322 NAS chassis.
Remove the contents of the NAS package from the box.
S
1
TEP
Place the chassis upright on a flat surface.
S
2
TEP
From disk bay 1, remove the disk tray.
S
3
TEP
6
Description
USB port for accessing USB attached
storage and UPS status.
Attach a Kensington lock to protect the
device from theft.
System fan.
Cisco Small Business NSS322 Smart Storage
Cisco
, located on the
Hide quick links:
Advertisement
Table of Contents
