To lock the disk tray:
Verify that the disk tray is fully inserted in the chassis with the disk
S
1
TEP
tray lever down.
Lift the silver tab up to lock the tray.
S
2
TEP
Continue to
S
3
TEP
To unlock and remove the disk tray:
On the disk tray, press the silver tab down to unlock the tray.
S
1
TEP
Press on the button below the silver tab to release the disk tray
S
2
TEP
lever.
Using the disk tray lever, gently pull the disk tray out from the
S
3
TEP
chassis.
Connecting the Equipment
6
Follow these steps to connect the NAS device to the network.
Connect the supplied Ethernet cable to one of the Ethernet ports on
S
1
TEP
the back of the chassis.
Connect the other end of the Ethernet cable to a switch or router on
S
2
TEP
your network.
10
Connecting the Equipment, page
Cisco Small Business NSS322 Smart Storage
10.