Cisco Smart Storage NSS322 Quick Start Manual page 19

• Click Use the following settings to configure a static IP
address:
-
-
-
-
-
Click Next. You are redirected to a window where you can select
S 23
TEP
the services to be enabled.
Select the services to be enabled. These services can also be
S 24
TEP
enabled or disabled at a later time. The options are:
• Network services—Click the check box to enable Microsoft
Networking, Apple Networking, or Unix/Linux NFS.
• File services—Click the check box to enable Web File
Manager, FTP Service, or Download Station.
• Multimedia services—Click the check box to enable
Multimedia Station, UPnP multimedia server, or iTunes service.
• Web server services—Click the check box to enable Web
Server or MySQL server.
Click Next. You are redirected to a window where you can select
S 25
TEP
the disk configuration.
Select the disk configuration. The options are:
S 26
TEP
• Disk configuration:
-
-
Cisco Small Business NSS322 Smart Storage
IP Address—Enter an IP address for the NAS.
Subnet Mask—Enter the subnet mask of your network.
Default Gateway—Enter the default gateway address.
This is typically the IP address of your router.
Primary DNS Server (optional)—Enter the IP address of
the Domain Name System (DNS) server. This address is
typically provided by your Internet Service Provider (ISP).
Secondary DNS Server (optional)—Enter a second DNS
server.
Do not set disk configuration—If you have created disk
volume configuration or plan to create multiple disk
configurations, select not to initialize the disk drives.
Single Disk—Uses the disk drives as single disk volumes.
When a drive failure occurs, all data is lost.
19