Cisco Smart Storage NSS322 Quick Start Manual page 14

Change the administrator password by entering the new
S 15
TEP
password in the Password field. To verify the password, re-enter it
in the Verify Password field.
Click Next. You are redirected to a window where you can enter
S 16
TEP
the date, time, and time zone for this server.
Enter the date, time, and time zone for this server. The options are:
S 17
TEP
• Time Zone—Select a time zone from the drop-down menu.
• Date/Time—Select the current date and time from the drop-
down menus.
• Synchronize with an Internet time server automatically—To
obtain time automatically from an NTP server, click this check
box.
• Server—From the drop-down list, select the NTP server name
and click TEST to verify status.
For example:
-
-
-
• Set the server time the same as your computer time—To
synchronize the server time/clock with the time/clock on your
computer, click this check box.
Click Next. You are redirected to a window where you can enter
S 18
TEP
the IP address, subnet mask, and gateway for the server.
Enter the IP address, subnet mask, and gateway for this server. You
S 19
TEP
can either acquire the IP address automatically from a DHCP
server or choose to configure a static IP address.
• Obtain TCP/IP settings automatically via DHCP—Click this
check box to acquire the IP address from a DHCP server. This is
enabled by default.
• Click Use the following settings to configure a static IP
address:
-
-
-
14
time-a.timefreq.bldrdoc.gov (default)
time-b.timefreq.bldrdoc.gov
time-c.timefreq.bldrdoc.gov
IP Address—Enter an IP address for the NAS.
Subnet Mask—Enter the subnet mask of your network.
Gateway—Enter the gateway address. This is typically the
IP address of your router.
Cisco Small Business NSS322 Smart Storage