Cisco Smart Storage NSS322 Quick Start Manual page 13

Insert the product CD. The Welcome to the Setup Wizard window
S 1
TEP
opens.
Under First Time Installation, click Start. The End-User License
S 2
TEP
Agreement window opens.
To accept the End-User License Agreement, check the I accept
S 3
TEP
this agreement check box and click Next. The First Time
Installation Wizard window opens.
Click Next to run the wizard.
S 4
TEP
From the Hardware Installation Guide window, select your model.
S 5
TEP
Follow the prompts to check the package contents, install the disk
S 6
TEP
drives, and connect the equipment.
If you have already installed the disk drives and connected
N
OTE
the equipment, click Skip until you reach the System Configuration
window.
From the System Configuration window, click Next to go to NAS
S 7
TEP
configuration. The NAS Configuration window opens.
Click Next. The Discovering the NAS window opens and advises
S 8
TEP
when the uninitialized device is found.
Click Next. The Web Configuration window opens.
S 9
TEP
The First Time Installation Wizard detects the NAS and prompts
S 10
TEP
you to go through the web configuration process. From the drop-
down list, select a NAS device.
Click Next to continue. You are directed to a configuration window
S 11
TEP
to complete the settings step by step. The Welcome window
displays.
Click Next. You are redirected to a window where you can enter
S 12
TEP
the name for this server.
In the Server Name field, enter a name to identify the NAS device.
S 13
TEP
The server name can be a maximum length of 14 characters, which
supports alphanumeric characters (a-z, 0-9) and hyphens (-). It is
required that the server name begin with a letter versus a number.
The server name does not accept names with a space or period (.)
Click Next. You are redirected to a window where you can change
S 14
TEP
the administrator password.
The default administrator username is admin. The default
N
OTE
administrator password is admin.
Cisco Small Business NSS322 Smart Storage 13