Cisco Smart Storage NSS322 Quick Start Manual page 18

The server name can be a maximum length of 14 characters, which
supports alphanumeric characters (a-z, 0-9) and hyphens (-). It is
required that the server name begin with a letter versus a number.
The server name does not accept names with a space or period (.)
Click Next. You are redirected to a window where you can change
S 17
TEP
the administrator password.
The default administrator username is admin. The default
N
OTE
administrator password is admin.
Change the administrator password by entering the new
S 18
TEP
password in the Password field. To verify the password, re-enter it
in the Verify Password field.
Click Next. You are redirected to a window where you can enter
S 19
TEP
the date, time, and time zone for the server.
Enter the date, time, and time zone for this server. The options are:
S 20
TEP
• Time Zone—Select a time zone from the drop-down menu.
• Date/Time—Select the current date and time from the drop-
down menus.
• Synchronize with an Internet time server automatically—To
obtain time automatically from an NTP server, click this check
box.
• Server—From the drop-down list, select the NTP server name
and click TEST to verify status.
For example:
-
-
-
• Set the server time the same as your computer time—To
synchronize the server time/clock with the time/clock on your
computer, click this check box.
Click Next. You are redirected to a window where you can enter
S 21
TEP
the IP address, subnet mask, and default gateway for the device.
Enter the IP address, subnet mask, and default gateway for this
S 22
TEP
server. You can either acquire the IP address automatically from a
DHCP server or choose to configure a static IP address.
• Obtain TCP/IP settings automatically via DHCP—Click this
check box to acquire the IP address from a DHCP server. This is
enabled by default.
18
time-a.timefreq.bldrdoc.gov (default)
time-b.timefreq.bldrdoc.gov
time-c.timefreq.bldrdoc.gov
Cisco Small Business NSS322 Smart Storage