Basic operations by using the remote control
Using the AUTO SETUP
function
This function allows you to automatically adjust Input
search, Auto PC adjustment and Auto Keystone
correction during signal input from a computer.
button
Press the <AUTO SETUP> button on the
remote control.
Note
For details, see "Setting" of Main menu. (
z
Switching the input signal
You can switch the input signals to project.
Press (<COMPUTER 1>, <COMPUTER 2>,
<HDMI>, <VIDEO>, <S-VIDEO> ,
<COMPONENT> or <DIGITAL LINK>)
button on the remote control.
COMPUTER 1
COMPUTER 2
COMPONENT
DIGITAL LINK
Note
When connecting the optional
z
Box (ET-YFB100G) to the DIGITAL LINK terminal, press
the <DIGITAL LINK> button on the remote control to
switch the ET-YFB100G input signal.
Each press of the <INPUT> button on the Control Panel
z
of the main unit switches the settings as shown below.
Æ
(
Computer 1 (RGB)/
Computer 1 (Scart)/
Computer 1 (Component)
DIGITAL LINK
*1: It depends on the item you selected in the [Computer 1]
submenu of the [Input] menu.
*2: When [Monitor out] is selected in the [Terminal] of the
setting menu, [Computer 2(RGB)] can not be selected.
Pressing <COMPUTER 2> button on the remote control
displays [Monitor out].
Æ
page 53)
Using the SCREEN button
This function allows you to select screen mode or
change the screen size.
Press the <SCREEN> button on the
buttons
remote control.
Note
For details, see "Screen" of Main menu. (
z
Switch to Computer 1(RGB)/
Computer 1(Scart) input.
Switch to Computer 2(RGB)input.
HDMI
Switch to HDMI input.
VIDEO
Switch to Video input.
S-VIDEO
Switch to S-video input.
Switch to Computer 1
(Component) input.
Switch to DIGITAL LINK input.
accessory
page 19)
*
1
Computer 2
(RGB)
S-video
button
Digital Interface
*
2
HDMI
Video
Æ
page 49)
33
ENGLISH -