Twisted Pair Cable Extender Connections - Panasonic PT-VW431DU Operating Instructions Manual

Network

Twisted pair cable Extender connections

This projector is able to receive image and video signal from Twisted pair cable Extender via LAN cable.
Notes on Twisted pair cable Extender connections
Request the specialized technician or your dealer for wiring work of the cable for DIGITAL LINK. If the work is
z
not properly conducted, the cable transmission characteristics do not meet, and the images and sounds may
be interrupted or become unstable.
For the LAN cable between the Twisted pair cable Extender and the projector, use the cable that conforms
z
with the following conditions.
 Compatible to the CAT5e or a higher standard
 Shield type (including the connector)
 Straight wire connection
 Single wire
The maximum transferable distance is 100 m (328'11") between the Twisted pair cable Extender and
z
the projector. When the distance is longer than this maximum distance, the image or the sound may be
interrupted, or erroneous performance occurs in LAN.
When installing the cable, confirm that the cable specification satisfies the characteristics of CAT5e or higher by
z
using a cable tester or a cable analyzer. When a relay connector is used in the middle, measure in a condition
that the relay-connector is included.
Do not use the switching hub between the Twisted pair cable Extender and the projector.
z
When connecting to the projector using the Twisted pair cable Extender (receiver) of other maker, do not use
z
another Twisted pair cable Extender between the Twisted pair cable Extender of other maker and the projector.
The images and sounds may be interrupted or become unstable.
Do not pull the cable with a strong force. In addition, do not bend or fold forcedly.
z
The projector becomes easier to get affected by the internal noise, as well as the external noise. Therefore,
z
install and use the cable without being wound as much as possible.
Do not bind the cables between the Twisted pair cable Extender and the projector with other cables, especially
z
the power cable. Keep the distance from other parallely set cables as far as possible.
When connecting multiple cables, shorten the parallelly passing distance as short as possible.
z
Confirm that the signal quality is -12 dB or lower in [DIGITAL LINK status] after connecting the cable.
z
Forthe Twisted pair cable Extenders of the other maker, refer to the following URL.
z
http://panasonic.net/avc/projector/
66
- ENGLISH
Network connection example for Twisted
pair cable Extender
Computer
Projector
LAN cable
(straight)
LAN cable
(straight)
Twisted pair cable
LAN cable (straight)
Hub
Extender