Table of Contents
Advertisement
The air filter units are provided in side and back of the projector.
Replacement of the air filter unit (side)
J
1 )
Remove the air filter cover.
Open the air filter cover in the direction of the
z
arrow in the figure and remove it.
2 )
Remove the air filter unit.
i) Hold the knob of the air filter unit and pull out in
the direction of the arrow, the top of the air filter
unit will pop up.
ii) Take out the air filter unit upwards.
After removing the air filter unit, remove large
z
foreign objects and dust from the air filter
compartment and the projector's air intake port
if there are any.
3 )
Insert the new air filter unit.
Hold the air filter unit that the knob is outside of
z
the projector, perform Step 2) in the reverse order.
Do not press the filter part when push into the
z
projector at last.
4 )
Install the air filter cover.
Make sure that the air filter cover is closed tightly.
z
Replacement of the air filter unit (back)
J
1 )
Remove the air filter cover.
Open the air filter cover in the direction of the
z
arrow in the figure and remove it.
2 )
Remove the air filter unit.
Hold the knob of the air filter unit and pull out
z
in the direction of the arrow.
After removing the air filter unit, remove large
z
foreign objects and dust from the air filter
compartment and the projector's air intake port
if there are any.
3 )
Insert the new air filter unit.
Hold the air filter unit that the knob is outside of
z
the projector, perform Step 2) in the reverse order.
Do not press the filter part when push into the
z
projector at last.
4 )
Install the air filter cover.
Make sure that the air filter cover is closed tightly.
z
Resetting the Filter Counter
J
Be sure to reset the Filter counter after replacing the filter. (
Attention
Turn off the power before you replace the air filter units.
z
When attaching the air filter unit, make sure that the projector is stable, and work in an environment that is
z
safe, even in the event of the air filter unit dropping.
Do not operate the projector with the air filter units removed. Dust may accumulate on the optical elements
z
degrading picture quality.
Do not put anything into the air vents. Doing so may result in malfunction of the projector.
z
The air filter unit to be replaced should be an unused product.
z
After replacing the air filter, reset the filter counter. Otherwise, the power of the projector may be turned off for
z
safety.
Knob
Air filter cover (back)
Knob
Air filter unit (back)
page 59 "Filter counter reset")
Æ
Replacement
Air filter cover (side)
Air filter unit (side)
ENGLISH -
81
Advertisement
Chapters
Table of Contents
