Sound; Volume; Mute; Mic - Panasonic PT-VW431DU Operating Instructions Manual

Sound

Sound
Select [Sound] from the Main Menu (see
"Navigating through the menu" on page 37),
then select the item from the sub-menu.
Remote Control

Volume

1 ) Press ▲▼ to select [Volume] and then
press the <ENTER> button.
2 ) Press ◄► to adjust the volume.
Press <ENTER> button to set the volume.
z
Operation
Press ►.
Press ◄.
You can press <VOLUME +/–> buttons on the
z
remote control to adjust the volume. Also you
can press the
adjust the volume when menu is off.

Mute

1 ) Press ▲▼ to select [Mute].
2 ) Press the <ENTER> button to switch
the mute function [On]/[Off].
Press the <MUTE> button on the remote
z
control also can switch the mute function On/
Off. ( page 36)
Æ
52
- ENGLISH
Control Panel
Adjustment
Adjustment
range
turn up the Maximum
volume value 63
turn down the Minimum
volume value 0
◄►
on the control panel to

MIC

1 ) Press ▲▼ to select [MIC] and then
press the <ENTER> button.
2 ) Press ▲▼ to switch the MIC function
[On]/[Off].
When [Off] is selected in [MIC], the [MIC gain]
z
is not available.
Connect the computer 2 audio input signals to
z
COMPUTER AUDIO IN 1 terminal as the MIC
function is turned on.
If the MIC function is turned on when
z
connecting PC audio to the AUDIO IN (a mini
jack), loud sound may be output suddenly
depending on the setting value of [MIC gain].

MIC gain

1 ) Press ▲▼ to select [MIC gain] and
then Press the <ENTER> button.
2 ) Press ◄► to adjust the MIC mixing
gain.
Press <ENTER> button to set the [MIC gain].
z
Operation Adjustment
turn up the MIC
Press ►.
mixing gain
turn down the
Press ◄.
MIC mixing gain

In standby mode

This function is used to switch the output sound On/
Off at standby mode.
1 ) Press ▲▼ to select [In standby mode]
and then press the <ENTER> button.
2 ) Press ▲▼ to switch [On]/[Off].
When setting the In standby mode function
z
to [On] and in Standby mode status, sound
volume can be adjusted with ◄► buttons on
the control panel or <VOLUME +/-> buttons on
the remote control.
[MIC] is set to [On] to output MIC sound at
z
standby mode status.
Only the [Standby mode] is set to [Network],
z
[In standby mode] can be selected.
Adjustment
range
Maximum
value 63
Minimum
value 0