Product Range Overview; I-1 Ultra-Compact Satellite Enclosure; I-2 Ultra-Compact Fullrange Enclosure - EM Acoustics i-1 User Manual

PRODUCT RANGE OVERVIEW

i-1 Ultra-Compact Satellite Loudspeaker
The i-1 is a compact, satellite mid/high loudspeaker, designed for a wide variety of discreet sound reinforcement
applications from museums and themed attractions through to infills in nightclubs and bars. It contains a single 4"
(102mm) titanium cone drive unit, with integral passive circuitry for unprecedented sonic performance from an
enclosure type where compromises are usually made. Small enough to be easily concealed, yet with enough SPL
output to be of use in low to medium SPL applications.
As with all EM Acoustics products, no external equalisation is required to make the i-1 perform as specified. A
high-pass filter set at 125Hz (24dB/Octave minimum) is recommended to prevent the drive unit from over-
excursion.
i-2 Ultra-Compact Fullrange Loudspeaker
The i-2 is an ultra-compact fullrange loudspeaker, designed specifically for applications where controlled, accurate
dispersion is required. The use of a 4" x 1" planar wave drive unit for HF allows the i-2 to produce a coverage
pattern of 90° x 20°, which can be rotated to allow use in any orientation. Innovative passive crossover technology
creates perfect time alignment between the three components, and avoids the interference lobing normally
encountered with such designs.
As with all EM Acoustics products, no external program or equalisation is required for the i-2 to function correctly.
However, for higher-SPL applications a high pass filter set above 50Hz is recommended.
4
i-Series User Manual
www.emacoustics.co.uk