Appendix A - Technical Specifications - EM Acoustics i-1 User Manual

APPENDIX A – TECHNICAL SPECIFICATIONS
EM Acoustics operates a continuous process of research and development, and as such reserves the right to alter specifications without notice.
i-1
Enclosure Type:
Dimensions (HxWxD, mm/ins):
Net Weight:
Frequency Response (+/- 3dB):
Sensitivity:
Dispersion:
Drive Units:
Power Handling:
Maximum SPL:
Nominal Impedance:
Crossover:
Connectors:
Enclosure:
Rigging/Suspension:
Grille:
Options:
Spares & Accessories:
compact fullrange enclosure
130/5.1 x 130/5.1 x 167/6.6
2kg
125Hz – 20KHz (with active high pass filter @ 125Hz)
86dB, 1W/1m
75°H x 75°V
4" (102mm) titanium cone drive unit
40W RMS, 80W Program
102dB continuous, 108dB peak
8 ohms
Active, recommended @ 125Hz
4mm Binding Posts
12mm (1/2") Finnish Birch plywood
4 x M5 threaded fittings
Perforated steel
Colours
DU-401 replacement drive unit
RG-I1 replacement grille/acoustic ring assembly
YK-I1 replacement i-1 yoke
XO-I1 passive circuitry
16
i-Series User Manual
www.emacoustics.co.uk