Upper Limit Switch Assembly; Remove And Replace; Lower Limit Switch - Broan Elite 15XESSEXF Service Manual

Upper Limit Switch Assembly

REMOvE AND REPLACE

This switch sets the upper travel limit for the ram
mechanism.
1. Remove the back panel from the cabinet cover (see
Access to Components, Remove Cabinet Cover).
SCREWS
2. Remove four Phillips head screws that secure the
switch assembly bracket to the top frame, and
remove the switch assembly.
3. Noting their locations, transfer the wires to the
replacement switch assembly.
4. Install the switch assembly and secure with four
Phillips head screws.
Section D – Electrical Components

Lower Limit Switch

REMOvE AND REPLACE
This switch sets the lower travel limit for the ram
mechanism.
1. Remove the back panel from the cabinet cover (see
Access to Components, Remove Cabinet Cover).
2. Remove two Phillips head screws and the switch
from the center stabilizer plate.
3. Noting their locations, transfer the wires to the
replacement switch.
4. Install the switch and secure with two Phillips head
screws.
SCREWS
29