Table of Contents
Advertisement
FASTENERS
6.
Remove two hex head screws, shims, brackets
and nuts (fasteners) from the top of the ram screw
assembly. Note orientation of bracket during removal
as they activate the limit switches.
Section C – Power Unit Mechanism
7.
Turn the ram until the top pin indexes 90° from the
pin slot; remove two hex screws, lock washers and
flat washers (fasteners).
8.
Turn the ram as required to align the ram pin with the
slot in the top frame and lower the ram through the
hole.
FASTENERS
PIN
PIN
SLOT
19
Advertisement
Table of Contents
