Port State
[Re-authenticate]
[Force Reinitialize]
[Re-authenticate All]
[Force Reinitialize All] Click to perform 802.1X initialization for all ports
[Parameters]
[Apply]
[Refresh]
4.10.1 802.1X Re-authentication Parameters
Configuration
Re-authentication Enabled
Re-authentication Period
EAP timeout
[Apply]
[Refresh]
Force Unauthorized - the port is forced to be in unauthorized state.
Port 802.1X state
802.1X Disabled - the port is in 802.1X disabled state
Link Down - the port is in link down state
Authorized (green color) - the port is in 802.1X authorized state
Unauthorized (red color) - the port is in 802.1X unauthorized state
Click to perform a manual authentication for the port
Click to perform an 802.1X initialization for the port
Click to perform manual authentication for all ports
Click to configure Re-authentication parameters
Click to apply the configuration change
Click to refresh current configuration
Description
Check to enable periodical re-authentication for all ports
The period of time after which the connected radius clients must be
re-authenticated (unit: second), Value: 1- 3600
The period of time the switch waits for a supplicant response to an EAP
request (unit: second), Value: 1 - 255
Click to apply the configuration change
Click to refresh current configuration
-51-