Management Vlan - KTI Networks KGS-810F User Manual

4.4.1 Management VLAN

Management VLAN settings allow administrator to access the switch and perform the switch management over
a dedicated VLAN.
The following rules are applied with the Management VLAN:
1. If the VLAN function is disabled, Management VLAN settings are ignored and no VLAN limitation is
applied in accessing the switch web management interface. The switch web (http) server only accepts
untagged management packets and replies untagged packets to the management host.
2. If [Management VLAN - VID] settings is zero, no VLAN limitation is applied in accessing the switch web
management interface. The switch web (http) server only accepts untagged management packets and replies
untagged packets to the management host.
3. If [Management VLAN - VID] settings is not zero, The switch web (http) server only accepts tagged
management packets matched [Management VLAN -VID] and replies tagged packets with tag composed of
[Management VLAN] VID, CFI and User Priority settings to the management host. The egress port will
also be limited in the member ports of the matched VLAN group.
Summary of the rules:
VLAN Function
VLAN disabled
VLAN enabled
VLAN enabled
Notes:
1. To apply management VLAN function, be sure to configure a VLAN group that matches the management
VID first.
2. No matter how management VLAN is configured, login password authentication is still required.
Management VID
Ignore
VID=0
VID<>0
( 1 ~ 4095)
Switch Embedded Web Server operation
Accept untagged web packets
Reply untagged packets
No VLAN group member checking
Accept untagged web packets
Reply untagged packets
No VLAN group member checking
Accept matched tagged web packets only
Reply tagged packets with the configured tag
Matched VLAN group member checking
-31-